Pisces
Pisces
Multiple parameter
options satisfy the need for ICU, CCU, NICU
Technical Specifications |
||
| Display | ||
| : | 12.1” TFT/LED/LCD Touch screen | |
| Resolution | : | 800 x 600 |
| Number of traces | : | 10 waveforms |
| I/O | ||
| LAN | : | 1 Standard RJ45 port |
| WLAN | : | IEEE 802.11b/g/n |
| USB | : | 2 USB connectors |
| SD | : | 1 SD card socket (Optional) |
| VGA | : | 1 VGA monitor connector (Optional) |
| Output | : | 1 connector for Nurse call, Defib Sync Analog Output |
| ECG | ||
| Lead type | : | 3 Lead, 5-Lead, 12-Lead |
| ECG waveform | : | 2 Channels, 7 Channels, 12 Channels |
| Display sensitivity | : | 2.5mm/mV (x0.25), 5mm/mV (x0.5) 10mm/mV (x1.0), 20mm/mV (x2.0) |
| Wave sweep speed | : | 6.25mm/s, 12.5 mm/s, 25 mm/s, 50 mm/s |
| Bandwidth | : | Diagnostic mode :
0.05Hz~100Hz Monitor mode: 0.5Hz~40Hz Surgery mode: 1Hz~20Hz Strong filter mode: 5Hz~20Hz CMRR>100dB |
| Notch | : | 50/60Hz notch filter can be set to on or off Differential input impedance>5MΩ |
| Electrode polarization voltage range | : | ±400mV Baseline recovery time<3s after defibrillation (in monitor and surgery mode) |
| Calibration signal | : | 1mV (peak-peak), accuracy ±3% |
| RESP | ||
| Measurement method | : | Thoracic electrical bioimpedance |
| Measuring lead | : | Lead I, II |
| Wave gain | : | x0.25, x0.5, x1, x2 |
| Respiratory impedance range | : | 0.5-5Ω |
| Baseline impedance | : | 500-4000Ω |
| Gain | : | 10 grades |
| Scan speed | : | 6.25mm/s, 12.5mm/s, 25mm/s |
| TEMP | ||
| Accuracy | : | ±0.1⁰C or ±0.2⁰C ( without probe ) |
| Measurement range | : | 0~50⁰C ( 32~122⁰F ) |
| Channel | : | Two channels |
| Resolution | : | 0.1⁰C |
| Parameters | : | T1, T2 and TD |
| SpO2 | ||
| Measurement range | : | 0-100% |
| Resolution | : | 1% |
| Accuracy | : | ±2% ( 70-100%, Adult/Paediatric); ±3% (70-100%, Neonate); 0-69%, unspecified |
| Refreshing Rate | : | 1s |
| Masimo SET SpO²(Optional) | ||
| Measurement range | : | 0-100% |
| Resolution | : | 1% |
| Accuracy | : | ±2% ( 70-100%, Adult/Pediatric,
Non-Motion, Low perfusion); ±3% ( 70-100%, Neonate, Non-motion); 0-69%, unspecified |
| Refreshing Rate | : | 1s |
| Pulse Rate | ||
| Range | : | 20~300 bpm |
| Resolution | : | 1 bpm |
| Accuracy | : | ±3bpm ( non-motion) ±5bpm ( motion) |
| Refreshing rate | : | 1s |
| NIBP | ||
| Measurement method | : | Automatic oscillometric method |
| Operating mode | : | Manual, automatic, continuous |
| Measurement unit | : | mmHg/kPa selectable |
| Typical measurement time | : | 20~40s |
| Measurement type | : | Systolic, Diastolic Mean Measurement range (mmHg) |
| Range of Systolic pressure | : | Adult 40-270 Pediatric 40-230 Neonatal 40-135 |
| Range of Diastolic pressure | : | Adult 10-210 Pediatric 10-150 Neonatal 10-100 |
| Range of Mean pressure | : | Adult 20-230 Pediatric 20-165 Neonatal 20-110 |
| Maximum average error | : | ±5mmHg |
| Maximum standard deviation | : | ±8mmHg |
| Resolution | : | 1mmHg |
| interval | : | 1,2,3,4,5,10,15,30,60,90,120,180,240,480 minutes |
| Overpressure protection | : | Software and hardware, double safety protection Cuff |
| Pressure range | : | 0-280mmHg |
| IBP(Optional) | ||
| Channel | : | 2-Channel or 4-Channel |
| Measurement Types | : | Systolic, Diastolic, Mean |
| Range | : | 0mmHg~300mmHg |
| Resolution | : | 1mmHg |
| Accuracy | : | ±2% or ±1mmHg, whichever is greater(without sensor) |
| Sensitivity | : | 5uV/mmHg/V |
| Impedance range | : | 300 to 3000Ω |
| C.O.(Optional) | ||
| Method | : | Thermodilution |
| Range | : | C.O.: 0.1 to 20 L/min TB : 23 to 43⁰C T1 : 0 to 27⁰C |
| Accuracy | : | C.O. : ±5% or ±0.1L/min, whichever is greater |
| TB, T1 | : | ±0.1⁰C ( without sensor) |
| Phasein Multi-gas IRMA AX+Mainstream CO2(Optional) | ||
| Gas | : | C02,N2O,HAL,ISO,ENF,SEV,DES with Automatic Identification |
| Warm-up time | : | Full accuracy within 20 seconds for IRMA AX+ |
| CO2 Accuracy | : | 0-10%: ±(02%+2% of the reading) 0- 15%:±(0.3% + 2% of the reading) |
| N2O Accurucy | : | 0-100%:±(2%+2% of the reading |
| HAL, ISO, ENF | : | 0-8%:±(0.15%+ 5% of the reading) |
| SEV | : | 0-10%±(0.15%+5% of the reading) |
| DES | : | 0-22%: ±(0.15% +5% of the reading) |
| Agent identification time | : | <20s(typical <10s) |
| AWRR range | : | 0-150 bpm |
| AWRR accuracy | : | +/- 1bpm |
| Apnea 1lme | : | 20s, 25s,30s,35s,40s |
| Recorder (Optional) | ||
| Horizontal resolution | : | 16 dots/mm (25 mm/s paper speed) |
| Vertical resolution | : | 8 dots/mm |
| Paper speed | : | 25 mm/s, 50 mm/s |
| Number of waveforms channels | : | 3 |
| Phasein IRMA Sidestream CO2 (Optional) | ||
| Warm-up time | : | Full accuracy within 10 seconds |
| Sampling flow rate | : | 50ml/min(±10/min) |
| Accuracy | : | ±(0.2% + 2% of the reading) |
| Measurement Range | : | 0-15% |
| Rise time | : | 200ms, typical at 50ml/min flow rat |
| Total response time | : | within 3 seconds ( with 2 m Momoline sampling Line) |
| AWRR Range | : | 0-150bpm |
| AWRR Accuracy | : | ±1 breath |
| Operation Environment | ||
| Power | : | AC - 250, 50/60Hz |
| Temperature | : | 0-40⁰C |
| Humidity | : | 15-85% |
| Patient Range | : | Adult, Pediatric, Neonate |
